英文模具合同范本1
Contract No.: ________________________.
Date of Signature: ____________________.
Place of Signature: ____________________.
This Contract is made and entered into through friendly negotiation by and between China ____________________ (hereinafter referred to as “Client”), as one party, and____________________ (hereinafter referred to as “Consultant”), as the other party, concerning the technical consultancy service of__________, under the following terms and conditions:
Article 1 Contents of Technical Consultancy Service
Whereas Client desires to obtain the technical consultancy service from Consultant and Consultant has agreed to perform such services.
The Scope of Technical Services is defined in Appendix 1.
The Time Schedule for the Services is shown in Appendix 2.
The Manning Schedule is described in Appendix 3.
Consultant shall complete the Services within __________months from the Effective Date of this Contract and furnish the final technical service report, including drawings, designing documents, all kinds of standards and photos, within ____ months. Consultant shall keep aware, free of charge, Client of the latest development of similar projects and any progress made in order to improve the designing of the project.
Article 2 Both Parties' Responsibility and Liability
Client shall furnish to Consultant the pertinent data, technical service reports, maps and information available to him and shall give Consultant the reasonable assistance necessary for carrying out of his duties. Particularly Client shall nominate a general representative who shall be available at reasonable time.
Client shall assist Consultant with the responsible authorities for obtaining visas, work permits, and other documents required by Consultant to enter the country and to have access to the Site of the Project. The above expenses shall be borne by Consultant.
Consultant shall furnish a sufficient number of competent personnel to perform its obligation hereunder, in addition to those personnel specifically listed in Appendix 3. All personnel employed by Consultant in carrying out the work shall be exclusively Consultant's responsibility, and Consultant shall hold Client harmless from any claims of any kind by Consultant's personnel arising out of any acts by Consultant or its personnel in connection with the work performed hereunder.
Consultant shall provide Client with all the technical service reports and relevant documentation within the Scope of Technical Services and within the Time Schedule for the Services.
Consultant shall assist Client‘s personnel in his country in obtaining visas and in arranging lodgings. Hotel and boarding expenses shall be borne by Client. Consultant shall supply Client’s personnel with office space and necessary facilities as well as transportation.
Consultant shall be responsible for and shall indemnify Client and his employee in respect of injury to person or damage to property occurring in connection with the services, to the extent that such damage or injury directly results from negligence of Consultant's personnel while engaged in activities under this Contract. Consultant shall be liable only to the work under this Contract.
Any and all liability of Consultant with respect to this Contract shall be limited to the Total Contract Price received by Consultant for his profession services and shall terminate upon expiration of the warranty period set forth in Article .
Article 3 Price and Payment
The total contract price is__________(say __________________only) in ________(currency). The breakdown prices of the above mentioned total contract price are as follows:
Contract Price for Item 1: ______(say ____________only) in________ (currency);
Contract Price for Item 2: ______(say ____________only) in________ (currency);
Contract Price for Item 3: ______(say ____________only) in________ (currency);
Contract Price for Item 4: ______(say ____________only) in________ (currency).
The total contract price shall include all the service and technology provided by Consultant. The total contract price shall be firm and fixed and shall not fluctuate with any inflation. The total contract price shall include all charges and expenses incurred by Consultant in performing his obligations both in his own country and in the People's Republic of China and includes the expenses incurred in sending the Technical Documentation to Client's office by all kinds of forms.
In the event of Force Majeure as defined in the Contract, the total contract price shall be readjusted through friendly negotiations between the parties. If Client requires services not contemplated in the Scope of Services, the parties shall friendly discuss an amendment to the total contract price. Any such amendment shall be in writing countersigned by both parties. This document shall then form integral part of the Contract.
All payments to be made by Client to Consultant under the present Contract shall be made by telegraphic transfer. In case of any payment by Client, the payment shall be effected through __________ in China to _________ for the account of Consultant.
In consideration for the services provided by Consultant hereunder, Client shall effect the payment to Consultant in accordance with the following manner and percentage:
_______ percent (________ %) of the total contract price, (Say: ________ only), shall be paid by Client to Consultant within ________ (____) days after the client has received the following documents provided by Consultant and found them in order.
A. One (1) original and two (2) duplicate copies of Consultant's government approval, or a written statement of the competent authorities or relevant agency of Consultant's country certifying that such document is not required;
B. One (1) original and one (1) duplicate copy of Irrevocable Letter of Guarantee for advance payment issued by Consultant's Bank in favor of Client covering_______(Say:________ only), specimen of which is as per Appendix 4;
C. Five (5) copies of profoma invoice covering the total contract price;
D. Five (5) copies of manually signed commercial invoice indicating the amount to be paid;
E. Two (2) copies of sight draft.
The said shall be delivered by Consultant not later than ____days after the effective date of the ________present Contract.
________percent (____%) of the Contract price for Item 1, (Say: __________ only) shall be paid by Client to Consultant within _____ (__) days after Client has received the following documents provided by Consultant and found them in order.
A. Ten (10) copies of technical service report on Item 1;
B. Five (5) copies of manually signed commercial invoice indicating the amount to be paid;
C. Two (2) copies of sight draft.
________ percent (____%) of the Contract price for Item 2, . ___________ (Say: ____________ only) shall be paid by Client to Consultant within ________ (___) days after Client has received the following documents provided by Consultant and found them in order.
A. Ten (10) copies of technical service report on Item 2;
B. Five (5) copies of manually signed commercial invoice indicating the amount to be paid;
C. Two (2) copies of sight draft.
________percent (____%) of the Contract price for Item 3, (Say: __________ only) shall be paid by Client to Consultant within _____ (__) days after Client has received the following documents provided by Consultant and found them in order.
A. Ten (10) copies of technical service report on Item 3;
B. Five (5) copies of manually signed commercial invoice indicating the amount to be paid;
C. Two (2) copies of sight draft.
________percent (____%) of the Contract price for Item 4, (Say: __________ only) shall be paid by Client to Consultant within _____ (__) days after Client has received the following documents provided by Consultant and found them in order.
A. Ten (10) copies of technical service report on Item 4;
B. Five (5) copies of manually signed commercial invoice indicating the amount to be paid;
C. Two (2) copies of sight draft.
________percent (____%) of the Total Contract price, (Say: __________ only) shall be paid by Client to Consultant within _____ (__) days after Client has received the following documents provided by Consultant and found them in order.
A. Five (5) copies of manually signed commercial invoice indicating the amount to be paid;
B. Two (2) copies of sight draft.
In case Consultant is liable for paying to Client the penalty under the Contract, Client shall have the right to deduct it from any said payment.
The banking charges of both parties incurred in China for the execution of the Contract shall be borne by Client and those incurred outside China shall be borne by Consultant.
Article 4 Delivery Schedule
The deadline for the arrival of the Technical service reports CIF _____ is:
A. Technical service report on Item 1: _________months after effectiveness of the Contract;
B. Technical service report on Item 2: _________months after effectiveness of the Contract;
C. Technical service report on Item 3: _________months after effectiveness of the Contract; and
D. Technical service report on Item 4: ________months after effectiveness of the Contract.
Consultant shall inform Client by fax when the Technical service reports are airmailed to Client indicating the date and number of airway bill. Client shall inform Consultant when the Technical service reports have been received.
Should any document be missing or damaged during the transport, Consultant shall be notified accordingly and within two (2) weeks the missing or damaged document shall be replaced by Consultant free of charge.
Article 5 Confidentiality
All data assembled, developed, compiled, reproduced, studied, and prepared in connection with the work done hereunder and furnished to Consultant by Client shall be considered confidential and shall not be divulged to any person, firm or corporation other than Client or its designated representatives. This Clause shall remain binding on Consultant notwithstanding the termination of the Contract for any reason.
Within the validity period of Contract, both parties shall take proper measures to keep the materials or information strictly confidential. The other party shall not disclose or divulge to any third party without prior written consent of one party.
Either party shall be obliged to keep confidential any secret information of the other party, which either party and its personnel may obtain or be accessible to in the course of the performance of Contract. Either party shall not make use of or disclose such secret information obtained from the other party without prior written permission issued by the other party.
Article 6 Taxes and Duties
All taxes and duties in connection with and in the execution of Contract levied by the Chinese government on Client in accordance with the tax laws of PRC shall be borne by Client.
All taxes and duties levied by the Chinese government on Consultant, in connection with and in the execution of Contract, according to Chinese tax laws and the agreement between the government of PRC and the government of Consultant's country for the reciprocal avoidance of double taxation and the prevention of fiscal evasion with respect to taxes on income shall be borne by Consultant.
Client is legally obliged to withhold, as a withholding agent, the amount of taxes pro rata each taxable payment under Contract and pay them to the relevant Chinese tax authorities. After receiving the tax receipts issued by the relevant Chinese tax authorities for the aforesaid withholding taxes, Client shall forward them to Consultant without undue delay.
All taxes and duties arising outside PRC in connection with and in the execution of Contract shall be borne by Consultant.
Article 7 Warranty
Consultant warrants that he has the experience and capability to efficiently and expeditiously perform the services in a satisfactory manner and that the services performed by him under this Contract shall be performed by competent personnel in accordance with accepted standards.
In the event of a failure of Consultant to provide Client with satisfactory services within the scope of work described in Appendix 1 at any time for any reason within the control of the Consultant, Client may notify Consultant of such dissatisfaction. Consultant shall be afforded a period of _____ days to correct or remedy the matter. Should Consultant within the time afforded by Client fail to correct or remedy the matter to the satisfaction of Client, all charges shall cease forthwith until such time as Consultant is able to provide satisfactory services in accordance with the Scope of work described in Appendix 1.
The Consultant‘s guarantee liability shall expire _____ months after its consultancy service is finally inspected and accepted by Client, or after final payment is made.
Article 8 Ownership of Technical Service Reports
Final version of the technical service report submitted to Client and all relevant data such as maps, plans and supporting material compiled in performing the Scope of Services, shall be the property of Client. Such materials shall be sorted and indexed by Consultant prior to transmission to Client.
Consultant shall be permitted to retain copies thereof, provided however that such materials, including the material furnished by Client as stated in Article 5 of this Contract, shall not be used by Consultant for purposes not related with this Project without the prior written approval of Client.
Article 9 Assignment
Neither Client nor Consultant shall assign or sublet their rights or obligations hereunder without the prior written consent of the other party.
Article 10 Termination
If, due to the responsibility of Consultant, the technical service reports have not been delivered at dates according to the delivery schedules as stipulated in Article 4 of the Contract, Consultant shall be obliged to pay to Client penalty for such delay in delivery at the following rates:
A. ______ percent (____%) of the total contract price per week for the first four weeks;
B. _____ percent (____%) of the total contract price per week from the fifth week to the eighth week;
C. ______ percent (____%) of the total contract price per week from the ninth week of delay.
Odd days less than one (1) week shall be counted as one (1) week for calculating the liquidated damage.
The total liquidated damage for late delivery shall not exceed ______ percent (____%) of the total contract price. Payment of the liquidated damage for late delivery shall not release consultant from its obligation to deliver technical service reports.
Client may, without prejudice to any other remedy for Consultant's following breach of Contract, terminate Contract in whole or in part by a written notice of default send to Consultant, if Consultant
A. Fails to deliver any or all of technical service reports within______(____) days after the scheduled delivery date as specified in Article 4; or
B. Fails to make the technical service reports meet the minimum level of Acceptance Standards as specified in Appendix 1.
Consultant shall refund to Client all the payments effected by Client to Consultant plus an interest at the rate of______ percent (____%) per annum in case of such a termination.
Either party may, without prejudice to any other remedy, terminate Contract in whole or in part by a written notice send to the other party, if the other party.
A. Fails to perform its confidentiality obligation under Contract; or
B. Fails to perform any other obligations under Contract except minor parts thereof, and does not remedy for its failure within a period of______ (____) days upon receipt of the written notice or a period agreed upon between the parties;
C. Becomes bankrupt or insolvent; or
D. Affected by any event of Force Majeure for more than ______ days.
Article 11 Force Majeure
Should either party be prevented from performing any of its obligations under Contract due to event of Force Majeure, such as war, serious fire, typhoon, earthquake, flood and any other events which could not be expected, avoided and overcome, the affected party shall notify the other party of its occurrence by fax and send by registered airmail a certificate issued by the competent authorities or agency within fourteen (14) days following its occurrence.
The affected party shall not be liable for any delay or failure in performing any or all of its obligations due to the event of Force Majeure. However, the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure without delay.
Both parties shall proceed with their obligations immediately after the cease of the event of Force Majeure or removal of the effects. The validity period of Contract and/or the scheduled period for relative execution of Contract shall be extended correspondingly.
Article 12 Arbitration
Any dispute arising from or in connection with this Contract shall be submitted to China International Economic and Trade Arbitration Commission,Shenzhen Sub-commission for arbitration in accordance with the Commission's arbitration rules in effect at the time of applying for arbitration. The arbitral award is final and binding upon both parties and the applicable law is the material law of .
Notwithstanding any reference to arbitration, both Parties shall continue to perform their respective obligations under the Contract unless otherwise agreed.
Article 13 Language and Standards
Correspondence except this Contract between Client and Consultant, data and documents made available by Client to Consultant and the technical service reports and drawings prepared by Consultant shall be in the English language.
Measures shall be written in the metric system.
Article 14 Governing Law
The construction, validity, and performance of this Contract shall be governed by the laws of the People's Republic of China.
Article 15 Effectiveness of the Contract and Miscellaneous
Both parties shall make effort to obtain the approval from the respective authorities, if necessary, within thirty (30) days after Contract is signed by the authorized representatives of the two parties. Either Party shall notify in writing the other party of the approval date. The later date of approval shall be taken as the Date of Effectiveness of Contract.
Contract shall be valid and remain in force for_______(____) years from the Date of Effectiveness.
The outstanding credit and debt between the parties under Contract shall not be affected upon the termination or expiration of Contract.
Appendices hereof shall be integral parts of Contract and have the same legal force as the text of Contract itself. The text of Contract shall prevail in case of any discrepancies between the text of Contract and Appendices.
All amendments, supplements, subtractions, or alterations to Contract shall be made in written form and become valid upon the signature of the authorized representatives of both parties. The valid amendments, supplements, subtractions, or alterations shall from an integral part of Contract and shall have the same legal force as the text of Contract.
All communications between the parties shall be in English in written form during implementation of Contract. Faxes concerning important matters shall be confirmed timely by registered or express mails.
The Contract is made in two counterparts each in Chinese and English, each of which shall deemed equally authentic. The Contract is in four (4) originals, two (2) for the Buyer and two (2) for the Seller.
Client: ________________________________________________.
Address: ______________________________________________.
Post Code: ____________________________________________.
Telephone: ________________. Fax: _________________.
E-mail: _______________________________________________.
Authorized Representative signature: ____________________.
Signing Date: __________________________________________.
Consultant: ____________________________________________.
Address: ______________________________________________.
Post Code :____________________________________________.
Telephone: ________________. Fax: _________________.
E-mail: _______________________________________________.
Authorized Representative signature: ___________________.
Signing Date: __________________________________________.
英文模具合同范本2
出口合同
Sales Contract
编 号：
No. :
签约地点：
Signed at:
日 期：
Date:
卖方：
Seller:
地址：
Address :
电话：
Tel:
传真：
Fax:
电子邮箱：
E-mail:
买方：
Buyer:
地址：
Address:
电话：
Tel:
传真：
Fax:
电子邮箱：
E-mail:
买卖双方经协商同意按下列条款成交：
The undersigned Seller and Buyer have agreed to close the following transactions according to the terms and conditions set forth as below:
1． 货物名称、规格和质量
1. Name， Specifications and Quality of Commodity:
2． 数量
2. Quantity：
3． 单价及价格条款
3. Unit Price and Terms of Delivery：
（除非另有规定，“FOB”、“CFR”和“CIF”均应依照国际商会制定的《20xx年国际贸易术语解释通则》（INCOTERMS 20xx)办理。)
The terms FOB，CFR，or CIF shall be subject to the International Rules for the Interpretation of Trade Terms (INCOTERMS 20xx) provided by International Chamber of Commerce (ICC) unless otherwise stipulated herein.)
4． 总价
4. Total Amount:
5． 允许溢短装
5. More or Less:＿＿＿%。
6． 装运期限
6. Time of Shipment:
收到可以转船及分批装运之信用证＿＿＿天内装运。
Within _____ days after receipt of L/C allowing transhipment and partial shipment.
7． 付款条件
7. Terms of Payment：
买方须于＿＿＿＿ 前将保兑的、不可撤销的、可转让的、可分割的即期付款信用证开到卖方，该信用证的有效期延至装运期后_____天在中国到期，并必须注明允许分批装运和转船。
By Confirmed， Irrevocable， Transferable and Divisible L/C to be available by sight draft to reach the Seller before ______ and to remain valid for negotiation in China until ______after the Time of Shipment. The L/C must specify that transshipment and partial shipments are allowed.
买方未在规定的时间内开出信用证，卖方有权发出通知取消本合同，或接受买方对本合同未执行的全部或部份，或对因此遭受的损失提出索赔。
The Buyer shall establish a Letter of Credit before the above-stipulated time， failing which， the Seller shall have the right to rescind this Contract upon the arrival of the notice at Buyer or to accept whole or part of this Contract non fulfilled by the Buyer， or to lodge a claim for the direct losses sustained， if any.
8． 包装
8. Packing：
9． 保险
9. Insurance：
按发票金额的＿＿＿%投保＿＿＿＿＿险，由＿＿＿＿负责投保。
Covering _____ Risks for______110% of Invoice Value to be effected by the ____________.
10． 品质/数量异议
10. Quality/Quantity discrepancy：
如买方提出索赔，凡属品质异议须于货到目的口岸之日起30天内提出，凡属数量异议须于货到目的口岸之日起15天内提出，对所装货物所提任何异议于保险公司、轮船公司、其他有关运输机构或邮递机构所负责者，卖方不负任何责任。
In case of quality discrepancy， claim should be filed by the Buyer within 30 days after the arrival of the goods at port of destination， while for quantity discrepancy， claim should be filed by the Buyer within 15 days after the arrival of the goods at port of destination. It is understood that the Seller shall not be liable for any discrepancy of the goods shipped due to causes for which the Insurance Company， Shipping Company， other Transportation Organization /or Post Office are liable.
11． 由于发生人力不可抗拒的原因，致使本合约不能履行，部分或全部商品延误交货，卖方概不负责。本合同所指的不可抗力系指不可干预、不能避免且不能克服的客观情况。
11. The Seller shall not be held responsible for failure or delay in delivery of the entire lot or a portion of the goods under this Sales Contract in consequence of any Force Majeure incidents which might occur. Force Majeure as referred to in this contract means unforeseeable， unavoidable and insurmountable objective conditions.
12． 争议的解决
12. Dispute Resolution:
凡因本合同引起的或与本合同有关的任何争议，均应提交中国国际经济贸易仲裁委员会，按照申请仲裁时该会现行有效的仲裁规则在南京进行仲裁。仲裁裁决是终局的，对双方均有约束力。
Any dispute arising from or in connection with this Contract shall be submitted to China International Economic and Trade Arbitration Commission for arbitration which shall be trialed in Nanjing and conducted in accordance with the Commission’s arbitration rules in effect at the time of applying for arbitration. The arbitral award is final and binding upon both parties.
13． 通知：
13. Notices：
所有通知用＿＿＿文写成，并按照如下地址用传真/电子邮件/快件送达给各方。如果地址有变更，一方应在变更后＿＿＿日内书面通知另一方。
All notice shall be written in _____ and served to both parties by fax/e-mail /courier according to the following addresses. If any changes of the addresses occur， one party shall inform the other party of the change of address within ____ days after the change.
14． 本合同为中英文两种文本，两种文本具有同等效力。本合同一式 _____ 份。自双方签字（盖章）之日起生效。
14. This Contract is executed in two counterparts each in Chinese and English， each of which shall be deemed equally authentic. This Contract is in _____ copies effective since being signed/sealed by both parties.
卖方签字：买方签字：
The Seller: The Buyer:
英文模具合同范本3
为保护双方的商业秘密，本着公平合理、平等互利的原则，双方经友好协商达成如下保密协议：
To protect commercial secretes of Party A and Party B hereof，following the principle of fairness, equity and mutual benefit, the two parties involved hereby reach this non-disclosure agreement:
1、甲方提供给乙方的任何资料均属于甲方的商业秘密，乙方负有保密义务。乙方负有保密义务的甲方商业秘密的范围包括但不仅限于如下陈述对象：
All the information provided by Party A to Party B are in the scope of commercial secrets, and Party B has the obligation to keep them confidential. The scope of commercial secrets of Party A that Party B has the obligations to keep confidential includes but is not limited to the followings:
模具合同（包含品种，规格，数量、价格因素，交期等信息）、模具检验标准及产品检验标准；
mold contract (including variety, specification, quantity and price factor, delivery date, etc.), mold inspection standard and product inspection standard;
与产品零件有关的任何资料、参数、图纸、夹具、工装等；
All information, parameters, drawings, fixtures and tools concerning parts of the product;
涉及甲方产品的外观、功能等方面的模型、样机；
models and samples of products concerning appearance and function of Party A;
任何标明具有“OPPO”或者等效标识的产品，包括IC卡，LCD显示屏，包装材料如彩盒、说明书、手提袋、广告制品、外壳等；
Any product marked with “OPPO” or equivalent signs including IC card, LCD display, packing material such as color dispenser, product manual, handbag, advertising product and casing;
甲方提供的模具技术、模具专利、产品专利、开发的系统流程；
mold technology, mold patent, product patent and system flow of development provided by Party A;
在乙方正在生产的甲方的模具状况、生产机型、订单明细（包括颜色、数量、交期等）等细节；
Information of mold produced by Party B, product model, detailed information of purchase order (including color, quantity and date of delivery) of Party A, etc.;
甲方未上市机型的外形、造型、配色、试模样品（包括试模的素材、涂装样品）等原始技术资料、实物；
Original technical data and actual product of Party A concerning appearance, industrial design, color matching, trial product of mold (including elements of trial mold and sample of coating) of the model that have not entered market yet;
其他甲方拥有知识产权结构设计方案及带有甲方专属LOGO的资料、实物。
Other structure design schemes to which Party A owns intellectual property rights, and information and actual product with exclusive LOGO of Party A;
2、对甲方上述商业秘密，乙方承担以下保密义务：
Party B has the following obligations to keep the abovementioned commercial secretes of Party A confidential:
主动采取加密措施对上述所列及之商业秘密进行保护，防止任何第三者知悉及使用；
Take active measures to protect the abovementioned commercial secretes in case they are learnt or used by a third party;
保证接触甲方商业秘密的员工不泄露知悉的甲方商业秘密，保证非接触甲方商业秘密的员工不得刺探 或者以其他不正当手段（包括利用计算机进行检索、浏览、复制等）获取甲方的商业秘密；
Ensure that all the employees of Party B to whom disclosure of commercial secrets of Party A is to be made will not have the commercial secrets disclosed, and ensure that all the employees of Party B for whom the commercial secrets of Party A are inaccessible shall not detect or obtain in illegal method (including but not limited to searching, browsing and copying on computer);
不得向任何第三者披露甲方的商业秘密；
Do not disclose the commercial secretes of Party A to a third party;
乙方除为履行义务且经甲方事先同意外，均不得为自己或他人之利益直接或间接使用上述机密资料及 知识产权；
Unless for performing obligations specified in the agreement and with prior consent from Party A, Party B shall not directly or indirectly use the abovementioned confidential information and intellectual property rights for benefits of Party B or anyone else;
不得允许（包括出借、赠予、出租、转让等行为）或协助任何第三方使用甲方的商业秘密；
Do not permit (including lending, presenting, releasing, transferring, etc.) or assist a third party in using the commercial secrets of Party A;
乙方了解甲方设有专门的对外发言及讯息披露制度，也承诺严格遵守该发言及讯息披露制度；
Party B acknowledges that Party A has set up special system of public statement and information disclosure, and promises to strictly abide by this system;
不论因何种原因终止与甲方合作后，都不得利用甲方的商业秘密为其他与甲方有竞争关系的企业（包 括自办企业）服务；
In case of termination of cooperation with Party A due to any reason, Party B shall not use the commercial secretes of Party A to provide service to the enterprise in competition with Party A (including self-invested enterprises);
乙方所占有、使用、监督或管理的与甲方知识产权有关的资料、机密资料均为甲方财产，应于合作结 束时悉数交还甲方，未经许可不得自行复制、传真、利用网络对外传送等。
All the related information and all the confidential information concerning intellectual property rights of Party A possessed, used, supervised or controlled by Party B, are under ownership of Party A, and shall all be returned to Party A at termination of cooperation. All the information are prohibited to be copied, faxed and transmitted through network in case of no authorization;
乙方同意甲方商业秘密之界定范围，无论故意或过失、无论以任何形式泄露甲方商业秘密均属违法行 为，甲方有权视违法情节和危害程度，采取向警方报案、采取强制措施、追究刑事责任等非常手段。
Party B agrees on the scope of commercial secretes specified by Party A. Disclosure of the commercial secretes of Party A in any form purposely or by fault is illegal. Party A has the right to report to the police, take compulsory measures and claim for criminal responsibility based on illegal condition and harm extent.
乙方如发现甲方的商业秘密被泄露或者自己过失泄露秘密，应当采取有效措施防止泄密进一步扩大，并及时向甲方报告。
When Party B finds that the commercial secretes of Party A are disclosed or divulged for fault of Party B, Party B shall take effective measures to stop further disclosure and timely report to Party A;
本协议规定的商业秘密所有权始终全部归属甲方，乙方不得利用自身对属于甲方商业秘密资料的不同程度的了解申请知识产权，在本协议签订前乙方已依法具有某些所有权者除外。
All the commercial secretes specified in this agreement are under the ownership of Party A, and Party B shall not apply for intellectual property rights by making use of learning about the commercial secretes of Party A it has learnt to any extent, those legally owned by Party B before signing this agreement excluded.
3、甲方保密义务： Non-disclosure obligations of Party A:
对于乙方提供甲方的样品、DEmO板，测试检验工装/软件、图纸、规格书等，甲方亦有责任根据乙方的要求，对等地遵守保密协议。
Based on requirements of Party B on the sample, DEmO panel, test and inspection tool/software, drawing, specification etc. provided by Party B to Party A, Party A accordingly has the obligation to keep them confidential as per this non-disclosure agreement.
4、保密期限 Term of non-disclosure
甲、乙双方确认，乙方的保密义务自本协议签订时开始，直至甲方主动公开该保密信息时止。乙方是否继续与甲方合作，不影响保密义务的履行。
Party A and Party B hereof confirm that non-disclosure obligations of Party B come into force on signing of this agreement till the confidential information is voluntarily disclosed by Party A. Whether Party B will continue further cooperation with Party A or not will not affect the performance of non-disclosure obligations by Party B;
5、违约责任 Responsibility for breach of contract
如乙方未履行本协议规定的保密义务，乙方需支付人民币伍拾万元的违约金，违约金不足以弥补甲方损失的，甲方有权要求乙方赔偿损失。
Provided Party B fails to perform non-disclosure obligations stipulated in this agreement, Party B shall pay RmB500, 000 as compensation for breach of contract. In case that the compensation for breach of contract is not s
